Apartment four-mask edit
2026-10-15 · Work's edit of the production plate (sha b8ad3fe6…) against the pre-edit plate (12e5e644…)
Raises it: a native phone repaint that reads as a phone at 390 pt (+10); a look at the chain at phone size (+5).
Verdict
Door: pass. The chain is unhooked and hangs straight from its anchor, and the slide track is empty. The peephole is a 14 px brass ring at (152, 766) and doesn't read as a lock.
Walls: pass, modest. No seams at the mask edges. Fine-detail energy inside the wall mask fell from 5.9 to 5.2 (12%). The mottling reads visibly calmer.
Calibration: unchanged. All 21 control points are pixel-identical to the fitted plate, so the applied camera (14.4 px RMS) still holds. Nothing changed outside the four masks.
Phone: redo. Work enlarged the old 32 × 15 px patch to 64 × 30 by resampling. It came out soft and thick, it reads as a black box or a hard drive, and a brown sliver is left at its left end. At 64 px it is also about 0.22 m long. A true-size phone is about 43 px (0.15 m).
Door, 3× (before | after)
Phone, 5× (before | after)
Walls (before over after)
Open Questions (1)
It blocks updating the plate sha and the scene status. Recommendation: Work repaints the phone natively in the same mask: a slim, face-down phone about 44–48 px long and 6–8 px thick, with a thin contact shadow, and the brown sliver cleaned up. A Photoshop fix works too, but it waits until you're back at your laptop.